a级免费在线观看-a级毛片在线播放-a级毛片无码免费真人-a级毛片视频免费观看-a级毛片免费播放-a级毛片观看

Summary

YGP East column roller table uses variable frequency speed regulation three-phase asynchronous motor (hereinafter referred to as frequency conversion roller table motor), which is always used to move the work roller of metallurgical painting industry separately. The control system composed of converter power supply and variable speed regulation device can make the motor get smooth stepless speed regulation, the variable speed mechanism is simple and the speed is accurate. The purpose of energy saving and automation is YGP series variable frequency roller motor with high starting torque, strong over-education ability, low starting current, fast and stable starting and speed regulation range.

The utility model has the advantages of high precision, fixed operation and maintenance, and is convenient for operation and maintenance.

YGP series variable roller table motor is suitable for starting, braking, speed regulation and other working conditions, especially for frequent positive and reverse.

On the quilt equipment, it can also be applied to its public machinery and equipment.

YGP series variable frequency roller motor is closed, self-cooling, cooling mode is [C410: motor shell protection stage is EP54 or 1P65: motor adopts [class or mountain level insulation], class F insulation motor is suitable for places where ambient air temperature does not exceed 10, and mountain insulation motor meets for places where ambient air temperature does not exceed 60C). YGP series hot roller table motor can normal tower elevation not exceeding 1000mrt under the following working conditions

two。 Ambient air temperature does not exceed 60 'class final): 3. Indoor gray place: 4 frequent civil opportunity perturbation and impact. 5. Tight starting, braking and reversal

The rated voltage of VCP series variable frequency roller motor is 380V, the rated frequency base is 9) is 501z. Motor stator flow flat

For Ya according to the method or human connection method, suitable for frequency converter power supply. The rated frequency (that is, the base mode) written in the loft seat can be customized at 20 50Hz according to the user's request.

概述 

YGP 系列輥道用變頻調速三相異步電動機（以下簡稱變頻輥道電動機)，采用變煩器供電，與變煩調速裝置組成的控制系統可使電動機得到平滑的無級調速，加裝編碼器，轉速準確，可選到節能和實現自動化的目的 YGP系列變頻輥道電動機的起動轉矩高，過教能力強，起動電流小，起動快速平穩，調速范圍 

精度高、運行移定，操作和維護方便。 

YGP系列變頓輥道電動機適用于起動、制動、調速等工作狀態，特別適用于頻繁正、反轉的 

機被設備上，也可適用于其公機械設備上。 

YGP系列變頻輥道電動機為封閉型，自冷武、冷卻方式為[C410：電動機外殼防護級為 EP54或1P65：電動機采用F級絕緣電動機適用于環境空氣溫度不超過 10的場所，山級絕緣電動機用于環境空氣溫度不超過60C的場所。 YGP系列變頻輥道電動機在下列工作條件下能夠正常海拔不超過1000mrt 

2.環境空氣溫度地高不超過60' : 3.室內多灰全的場所: 4經常Y用于頻繁啟動與沖擊. 5.頓緊的起動、制動和反轉 

變頻輥道電動機的額定電壓為380V，額定頻率基9)為501z。適用于變頻器供電。洛機座寫的額定頻率(即基模)可按用戶要求在20 50Hz而選擇定做。電動概的工作轉陽:基頻以下為恒輕短，華繃以上為面功豐，加率變化范國 5-100Hlz.YGP條列變頻道電機的標準工作制為S5 8O%.